Smartphone-based particle tracking velocimetry for the in vitro assessment of coronary flows.

The present study adopts a smartphone-based approach for the experimental characterization of coronary flows. Technically, Particle Tracking Velocimetry (PTV) measurements were performed using a smartphone camera and a low-power continuous wave laser in realistic healthy and stenosed phantoms of left anterior descending artery with inflow Reynolds numbers approximately ranging from 20 to 200. A Lagrangian-Eulerian mapping was performed to convert Lagrangian PTV velocity data to a Eulerian grid. Eulerian velocity and vorticity data obtained from smartphone-based PTV measurements were compared with Particle Image Velocimetry (PIV) measurements performed with a smartphone-based setup and with a conventional setup based on a high-power double-pulsed laser and a CMOS camera. Smartphone-based PTV and PIV velocity flow fields substantially agreed with conventional PIV measurements, with the former characterized by lower average percentage differences than the latter. Discrepancies emerged at high flow regimes, especially at the stenosis throat, due to particle image blur generated by smartphone camera shutter speed and image acquisition frequency. In conclusion, the present findings demonstrate the feasibility of PTV measurements using a smartphone camera and a low-power light source for the in vitro characterization of cardiovascular flows for research, industrial and educational purposes, with advantages in terms of costs, safety and usability.

A comparative study on the rheological properties of concentrated xanthan gum in combination with gum arabic or gum arabic-based emulsion.

A goal of this study is to explore the difference in rheological properties of xanthan gum (XG)-based mixtures with gum arabic (GA) or GA-based emulsion (GAE). The stability of GAE was improved by thickening with XG. The intrinsic viscosity of all mixtures decreased as GA concentration increased, implying an XG conformational transition from the disordered to the ordered form. All mixtures except for an XG-GA mixture at 6.0 % GA attained a higher consistency index value than XG alone, indicating synergistic interactions between the components. At a high GA concentration (>3.0 %), the XG-GAE mixture showed higher relative apparent viscosity values than the XG-GA mixture. All mixtures except for an XG-GA mixture at 6.0 % GA showed higher elastic modulus and lower viscous modulus values than XG alone. Consequently, all mixtures showed lower tan δ values (0.26-0.30) than XG alone (0.31). Moreover, with a high GA concentration (>1.5 %), the XG-GAE mixtures achieved lower relative tan δ values than XG-GA mixture. These results indicate that XG formed a higher weak gel-like network with GAE than GA. Overall, the findings demonstrate that the interaction between XG and GA is influenced by conformational changes in the latter in both aqueous and emulsion systems.

Thermal-tagging photoacoustic remote sensing flowmetry.

Ultrasound coupling is one of the critical challenges for traditional photoacoustic (or optoacoustic) microscopy (PAM) techniques transferred to the clinical examination of chronic wounds and open tissues. A promising alternative potential solution for breaking the limitation of ultrasound coupling in PAM is photoacoustic remote sensing (PARS), which implements all-optical non-interferometric photoacoustic measurements. Functional imaging of PARS microscopy was demonstrated from the aspects of histopathology and oxygen metabolism, while its performance in hemodynamic quantification remains unexplored. In this Letter, we present an all-optical thermal-tagging flowmetry approach for PARS microscopy and demonstrate it with comprehensive mathematical modeling and ex vivo and in vivo experimental validations. Experimental results demonstrated that the detectable range of the blood flow rate was from 0 to 12 mm/s with a high accuracy (measurement error:±1.2%) at 10-kHz laser pulse repetition rate. The proposed all-optical thermal-tagging flowmetry offers an effective alternative approach for PARS microscopy realizing non-contact dye-free hemodynamic imaging.

Pinching dynamics, extensional rheology, and stringiness of saliva substitutes.

Saliva substitutes are human-made formulations extensively used in medicine, food, and pharmaceutical research to emulate human saliva's biochemical, tribological, and rheological properties. Even though extensional flows involving saliva are commonly encountered in situations such as swallowing, coughing, sneezing, licking, drooling, gleeking, and blowing spit bubbles, rheological evaluations of saliva and its substitutes in most studies rely on measured values of shear viscosity. Natural saliva possesses stringiness or spinnbarkeit, governed by extensional rheology response, which cannot be evaluated or anticipated from the knowledge of shear rheology response. In this contribution, we comprehensively examine the rheology of twelve commercially available saliva substitutes using torsional rheometry for rate-dependent shear viscosity and dripping-onto-substrate (DoS) protocols for extensional rheology characterization. Even though most formulations are marketed as having suitable rheology, only three displayed measurable viscoelasticity and strain-hardening. Still, these too, failed to emulate the viscosity reduction with the shear rate observed for saliva or match perceived stringiness. Finally, we explore the challenges in creating saliva-like formulations for dysphagia patients and opportunities for using DoS rheometry for diagnostics and designing biomimetic fluids.

Adaptive river flow measurement method based on spatiotemporal image velocimetry and optical flow.

This paper proposes an adaptive river discharge measurement method based on spatiotemporal image velocimetry (STIV) and optical flow to solve the problem of blurred texture features and limited measurement accuracy under complex natural environmental conditions. Optical flow tracking generates spatiotemporal images by following the flow mainstream direction of rivers with both regular and irregular natural banks. A texture similarity function filtering method effectively enhances spatiotemporal texture features. The proposed method is applied to a natural river, with measurement results from a propeller-type current meter used as truth values. It is evaluated and compared with three other methods regarding measurement accuracy, error, and other evaluation indices. The results demonstrate that the method significantly improves spatiotemporal image quality. Its estimation outcomes perform better across all evaluation metrics, enhancing the adaptability and accuracy of the flow measurement method.

Ultrasound-assisted starch hydrolyzing by alpha-amylase: Implementation of computational fluid dynamics, acoustic field determination, and rheology modeling.

The study aimed to optimize the ultrasonic-assisted modification (UAM) of corn and potato starch by assessing the influence of ultrasound geometry, power, and frequency on the fluid flow for sonicated starch to achieve porous starch with a higher degree of hydrolyzing by α-amylase. This assessment was conducted through mathematical modeling and 3D computational fluid dynamics (CFD) simulations. The ultrasonic pressure field is determined by the solution of the non-linear Westervelt equation in the frequency domain. Then, the obtained field is utilized to simulate the dissipated power and flow field characteristics. According to the results obtained from the Rapid Visco Analyzer (RVA), it was observed that the peak and final viscosity of hydrolyzed sonicated starch were less than hydrolyzed native starch. This decrease in viscosity indicates a breakdown of the starch structure, leading to a more fluid-like consistency. The shear rate and shear stress data are used for rheology modeling. The fluid's viscosity is represented based on three models of Herschel-Bulkley, Casson, and Power law (Ostwald-de Waele). The magnitude of yield shear stress at low shear rates, the shear-thinning behavior, and the nearly Newtonian fluid nature at high shear rates are extracted from the viscosity models. The surfaces of the starch granules were analyzed using scanning electron microscopy (SEM) revealed that sonication treatments caused damage, cracks, and porosity on the surfaces of the starch granules which were prone to amylolytic enzymes. This indicates that the structural integrity of the granules was compromised and facilitated enzyme penetration. This study proposes that ultrasonication can be utilized to produce damaged starch, which is susceptible to hydrolysis by α-amylase. This approach holds the potential for reducing enzyme consumption in various industries.

Acoustic resolution photoacoustic Doppler flowmetry for assessment of patient rectal cancer blood perfusion.

Significance: Photoacoustic Doppler flowmetry offers quantitative blood perfusion information in addition to photoacoustic vascular contrast for rectal cancer assessment. Aim: We aim to develop and validate a correlational Doppler flowmetry utilizing an acoustic resolution photoacoustic microscopy (AR-PAM) system for blood perfusion analysis. Approach: To extract blood perfusion information, we implemented AR-PAM Doppler flowmetry consisting of signal filtering and conditioning, A-line correlation, and angle compensation. We developed flow phantoms and contrast agent to systemically investigate the flowmetry's efficacy in a series of phantom studies. The developed correlational Doppler flowmetry was applied to images collected during in vivo AR-PAM for post-treatment rectal cancer evaluation. Results: The linearity and accuracy of the Doppler flow measurement system were validated in phantom studies. Imaging rectal cancer patients treated with chemoradiation demonstrated the feasibility of using correlational Doppler flowmetry to assess treatment response and distinguish residual cancer from cancer-free tumor bed tissue and normal rectal tissue. Conclusions: A new correlational Doppler flowmetry was developed and validated through systematic phantom evaluations. The results of its application to in vivo patients suggest it could be a useful addition to photoacoustic endoscopy for post-treatment rectal cancer assessment.

Effect of apple high-methoxyl pectin on heat-induced gelation of silver carp myofibrillar protein.

The effect of adding apple high-methoxy pectin (HMP) (0-3 mg∙mL-1) on heat-induced gel characteristics of low concentration silver carp myofibrillar protein (MP) (15 mg∙mL-1) was studied. It was found that the hardness of gel increased by 20.6 times with adding 2 mg∙mL-1 HMP. Besides, HMP aided in the development of disulfide bonds and the aggregation of hydrophobic groups. During gel formation, the maximal storage modulus (G') of samples supplemented with 2 mg·mL-1 HMP was raised by a factor of 2.7. Of note, the images of SEM showed that protein and water were tightly combined with a proper amount of HMP and made its pores more uniform and dense. Meantime, the addition of moderate amounts of HMP enabled the formation of gels with favorable texture and performance at low concentration of MP was identified, which could provide a theoretical reference for the design and production of flesh low-calorie food gel.

Artificial intelligence-based speckle featurization and localization for ultrasound speckle tracking velocimetry.

Deep learning-based super-resolution ultrasound (DL-SRU) framework has been successful in improving spatial resolution and measuring the velocity field information of a blood flows by localizing and tracking speckle signals of red blood cells (RBCs) without using any contrast agents. However, DL-SRU can localize only a small part of the speckle signals of blood flow owing to ambiguity problems encountered in the classification of blood flow signals from ultrasound B-mode images and the building up of suitable datasets required for training artificial neural networks, as well as the structural limitations of the neural network itself. An artificial intelligence-based speckle featurization and localization (AI-SFL) framework is proposed in this study. It includes a machine learning-based algorithm for classifying blood flow signals from ultrasound B-mode images, dimensionality reduction for featurizing speckle patterns of the classified blood flow signals by approximating them with quantitative values. A novel and robust neural network (ResSU-net) is trained using the online data generation (ODG) method and the extracted speckle features. The super-resolution performance of the proposed AI-SFL and ODG method is evaluated and compared with the results of previous U-net and conventional data augmentation methods under in silico conditions. The predicted locations of RBCs by the AI-SFL and DL-SRU for speckle patterns of blood flow are applied to a PTV algorithm to measure quantitative velocity fields of the flow. Finally, the feasibility of the proposed AI-SFL framework for measuring real blood flows is verified under in vivo conditions.

Development of an in vitro setup for flow studies in a stented carotid artery bifurcation.

To investigate flow conditions in a double-layered carotid artery stent, a bench-top in vitro flow setup including a bifurcation phantom was designed and fabricated. The geometry of the tissue-mimicking phantom was based on healthy individuals. Two identical phantoms were created using 3D-printing techniques and molding with PVA-gel. In one of them, a clinically available CGuard double-layer stent was inserted. Measurements were performed using both continuous and pulsatile flow conditions. Blood flow studies were performed using echoPIV: a novel ultrasound-based technique combined with particle image velocimetry. A maximum deviation of 3% was visible between desired and measured flow patterns. The echoPIV measurements showed promising results on visualization and quantification of blood flow in and downstream the stent. Further research could demonstrate the effects of a double-layered stent on blood flow patterns in a carotid bifurcation in detail.

Microrheological characterisation of Cyanoflan in human blood plasma.

Naturally occurring polysaccharidic biopolymers released by marine cyanobacteria are of great interest for numerous biomedical applications, such as wound healing and drug delivery. Such polymers generally exhibit high molecular weight and an entangled structure that impact the rheology of biological fluids. However, biocompatibility tests focus not so much on rheological properties as on immune response. In the present study, the rheological behaviour of native blood plasma as a function of the concentration of a cyanobacterium biopolymer is investigated via multiple particle tracking microrheology, which measures the Brownian motion of probes embedded in a sample, and cryogenic scanning electron microscope microstructural characterisation. We use Cyanoflan as the biopolymer of choice, and profit from our knowledge of its chemical structure and its exciting potential for biotechnological applications. A sol-gel transition is identified using time-concentration superposition and the power-law behaviour of the incipient network's viscoelastic response is observed in a variety of microrheological data. Our results point to rheology-based principles for blood compatibility tests by facilitating the assignment of quantitative values to specific properties, as opposed to more heuristic approaches.

Investigating the Hydrodynamics of Intravenous Drug Infusions.

One of the most common reported adverse events for intravenous (IV) infusions are infusion site reactions, ranging from redness and pain at the site of infusion to thrombophlebitis.  The connection between drug infusion and what drives these adverse events is not well understood. To aid in understanding these phenomena, it is crucial to accurately characterize the evolving hemodynamic environment of the infusion site when developing new intravenous formulations, as too rapid dilution may cause precipitation in the vein, while too little dilution might contribute to phlebitis. In this study, a Large-Eddy Simulation (LES) turbulence modeling inside a Computational Fluid Dynamics (CFD) framework has been used to simulate the flow and mixing characteristics of an infusion entering the bloodstream. This work represents the first such study reporting transient flow fields for intravenous infusions using LES CFD simulations with a realistic non-Newtonian blood model. The output of the CFD model closely resembled the flow and mixing patterns generated in benchtop tests for infusions into a blood analogue and water as the venous fluid across a wide range of flow rates.  These models were then investigated further to compare how changes to the fluid rheology model, needle orientation and needle position within the vein resulted in altered mixing regimes at different flow rates.

Energy spectrum analysis on a red blood cell model.

It is important to understand the dynamics of red blood cells (RBCs) in blood flow. This requires the formulation of coarse-grained RBC models that reproduce the hydrodynamic properties of blood accurately. One of the models that successfully reproduces the rheology and morphology of blood has been proposed by Fedosov et al. [Comput. Methods Appl. Mech. Eng. 199, 1937-1948 (2010)]. The proposed RBC model contains several parameters whose values are determined by either various experiments or physical requirements. In this study, we developed a new method of determining parameter values precisely from the fluctuations of the RBC membrane. Specifically, we studied the relationship between the spectra of the fluctuations and model parameters. Characteristic peaks were observed in the spectra, whose peak frequencies were dependent on the parameter values. In addition, we investigated the spectra of the radius of gyration. We identified the peaks originating from the spring potential and the volume-conserving potential appearing in the spectra. These results lead to the precise experimental determination of the parameters used in the RBC model.

Characterising the mechanical properties of soft solids through acoustics and rheology, exemplified by anhydrous milk fat.

Foods vary in their elastic properties over a wide range of behaviours. In the case of mastication, textures vary from hard solid through brittle (chocolate bar) and crispy/crunchy (biscuits) to viscous and extensional flow (syrup) and finally very low viscosity fluid (water). Here we deploy an elastic description of soft solids which embraces all these behaviours to quantify the elastic behaviour of food, in particular through the use of sound. We illustrate the use of this mathematical description in the quantitative characterisation of the elastic and flow properties of food through orthodox measurement techniques and novel ultrasound methods. Measurement is complicated by human sensory capabilities that span the entire range from solid to fluid to gas in an integrated manner, during the appreciation of food. We use acoustic and rheological measurement techniques for the determination of the mechanical properties of soft solids, comparing oscillatory rheometry with acoustic parameters as exemplified by acoustic and oscillatory rheometry measurements in crystallising anhydrous milk fat (AMF). We conclude that acoustic and rheological measurements complement each other with acoustic techniques offering the possibility of inline, in process determination of mechanical and flow properties such as viscosity, rigidity, compressibility and bulk modulus.

Particle Image Velocimetry (PIV) measurements of USP Apparatus 1 hydrodynamics with 500 mL fill volume.

Changes to hydrodynamics arising from changes within dissolution testing systems, such as the fill volume level, can potentially cause variability in dissolution results. However, the literature on hydrodynamics in Apparatus 1 is quite limited and little information is available for vessels with different liquid volumes. Here, velocities in a USP Apparatus 1 vessel with a liquid fill volume of 500 mL, a common alternative to 900 mL, were experimentally measured using 2D-2C Particle Image Velocimetry (PIV) for different basket rotational speeds. Tangential velocities dominated the flow field, while axial and radial velocities were much lower and varied with location. The velocities distribution increased proportionately with the basket rotational speed almost everywhere in the vessel excepting for underneath the basket. A nearly horizontal radial liquid jet was found to originate close to the basket upper edge. Comparison of these results with those previously reported with 900-mL liquid volume (Sirasitthichoke et al., Intern. J. Pharmaceutics:X; 3 (2021) 100078) showed that the flow rate through the baskets was similar in both systems, implying that, at least initially, the amount of drug in solution would increase linearly with time. In other words, the flow rate through the baskets would be independent of the liquid volume. Velocity profiles were also found to be similar, except in the region above the basket, which was affected by the radial jet with an orientation significantly different between the 500-mL and the 900-mL systems.

Comparison of particle image velocimetry and the underlying agents dynamics in collectively moving self propelled particles.

Collective migration of cells is a fundamental behavior in biology. For the quantitative understanding of collective cell migration, live-cell imaging techniques have been used using e.g., phase contrast or fluorescence images. Particle tracking velocimetry (PTV) is a common recipe to quantify cell motility with those image data. However, the precise tracking of cells is not always feasible. Particle image velocimetry (PIV) is an alternative to PTV, corresponding to Eulerian picture of fluid dynamics, which derives the average velocity vector of an aggregate of cells. However, the accuracy of PIV in capturing the underlying cell motility and what values of the parameters should be chosen is not necessarily well characterized, especially for cells that do not adhere to a viscous flow. Here, we investigate the accuracy of PIV by generating images of simulated cells by the Vicsek model using trajectory data of agents at different noise levels. It was found, using an alignment score, that the direction of the PIV vectors coincides with the direction of nearby agents with appropriate choices of PIV parameters. PIV is found to accurately measure the underlying motion of individual agents for a wide range of noise level, and its condition is addressed.

Uroflowmetry parameters in healthy children between 5 and 15 years old.

OBJECTIVES: Uroflowmetry (UFM) is the first-line noninvasive screening test employed in the diagnosis of lower urinary tract dysfunction (LUTD). The purpose of this study was to determine normal UFM values in healthy Turkish children among our local population. METHODS: A total of 100 healthy girls and 62 healthy boys aged 5-15 years, who applied to Inönü University Turgut Özal Medical Center Pediatrics Polyclinic between February 2021 and January 2022, were included in the present study. The UFM parameters, including maximum flow rate (Qmax), average flow rate (Qavg), voided volume (VV), time to maximum flow, and voiding time, were measured using the Inoflow Smart System UFM Device and the resulting urine flow curve was recorded. The children were compared in terms of the UFM parameters based on their gender and age groups (5-10 years and 11-15 years). RESULTS: The mean Qmax value in healthy female children aged 5-15 years (21.8 ± 8.6 mL/s) was significantly higher than in male children (17.98 ± 6.1 mL/s) (p = .003). VV, Qmax, and Qavg values of the children in the 11-15 age group were significantly higher than those in the age group of 5-10 years (p > .05 for each). VV, Qmax, and Qavg values were directly proportional to age (p = .0001, for each). CONCLUSIONS: We believe that this study adds to the limited knowledge base regarding normal flow patterns in healthy children.

Small Volume Microrheology to Evaluate Viscoelastic Properties of Nucleic Acid-Based Supra-Assemblies.

Particle tracking (PT) microrheology is a passive microrheological approach that characterizes material properties of soft matter. Multicomponent materials with the ability to create extensive crosslinking, such as supra-assemblies, may exhibit a complex interplay of viscous and elastic properties with a substantial contribution of liquid phase still diffusing through the system. Microrheology analyzes the motion of microscopic beads immersed in a sample, making it possible to evaluate the rheological properties of biological supra-assemblies. This method requires only a small volume of the sample and a relatively simple, inexpensive experimental setup. The objective of this chapter is to describe the experimental procedures for the observation of particle motion, calibration of an optical setup for particle tracking, preparation of imaging chambers, and the use of image analysis software for particle tracking in viscoelastic nucleic acid-based supra-assemblies.

Experimental study on flow and turbulence characteristics of jet impinging on cylinder using three-dimensional Lagrangian particle tracking velocimetry.

When a round jet impinges on a convex cylindrical surface, complex three-dimensional (3D) flow structures occur, accompanied by the Coanda effect. To characterize the flow and turbulence properties of the general system, ensemble averages of 3D Lagrangian particle tracking velocimetry measurements were taken. The radial bin-averaging method was used in post-processing the tracked particles and corresponding instantaneous velocity vectors to generate appropriate ensemble-averaged statistics. Two impinging angles were selected, and at a fixed Reynolds number, the ensemble-averaged volumetric velocity field and turbulent stress tensor components were measured. The flow and turbulence characteristics of the impinging jet on the cylinder were notably different based on the impinging angle, especially in the downstream region. Surprisingly, the attached wall jet with a half-elliptic shape was abruptly thickened in the wall-normal direction, similar to the axis switching phenomenon observed in elliptic jets in the case of oblique impingement. In the jet-impinging region, the flow spread in all directions with high mean vorticity values. With the development of a 3D curved wall jet, both the Coanda effect and centrifugal force played a significant role in the flow behavior. A notable feature of the self-preserving region was the similarity of mean velocity profiles with scaling by the maximum velocity and the jet half-width for both impinging angle cases. Local isotropy of turbulent normal stresses was observed in this region, supporting the existence of self-preservation in the 3D curved wall jet. The volumetric ensemble-averaged Reynolds stress tensor revealed strong inhomogeneous turbulence in the boundary layer region and the curvature effect on the Reynolds shear stress in the free shear layer.

Cooperative Rheological State-Switching of Enzymatically-Driven Composites of Circular DNA And Dextran.

Polymer topology, which plays a principal role in the rheology of polymeric fluids, and non-equilibrium materials, which exhibit time-varying rheological properties, are topics of intense investigation. Here, composites of circular DNA and dextran are pushed out-of-equilibrium via enzymatic digestion of DNA rings to linear fragments. These time-resolved rheology measurements reveal discrete state-switching, with composites undergoing abrupt transitions between dissipative and elastic-like states. The gating time and lifetime of the elastic-like states, and the magnitude and sharpness of the transitions, are surprisingly decorrelated from digestion rates and non-monotonically depend on the DNA fraction. These results are modeled using sigmoidal two-state functions to show that bulk state-switching can arise from continuous molecular-level activity due to the necessity for cooperative percolation of entanglements to support macroscopic stresses. This platform, coupling the tunability of topological composites with the power of enzymatic reactions, may be leveraged for diverse material applications from wound-healing to self-repairing infrastructure.